-
Billet Aluminum Reservior Cap for RZ350 - Replace your stock
-
Billet Aluminum Reservior Cap for RZ350 in Chrome - Replace your stock
-
Black plastic bolt head cap covers for metric socket head (allen) in sizes M8 or M6. Makes for a nice clean look. Sold each. These simply press in to the bolt head, easy to remove. note; Size M8 (for RZ handlebar risers and other M8 Allen head bolts), Size M6 (for RD/RZ engine case bolts and other M6 allen head head bolts)
-
Out of stockPhenol Novolac Epoxy Gas Tank Sealer by Caswell. Permanently Repairs Steel, Aluminum, Fiberglass and Plastic Gas Tanks. Phenol Novolac Epoxies are a new breed of chemical resistant materials, able to withstand permanent immersion of many harsh solvents, fuels and oils. This Epoxy has much better bond strength than single component products, with strengths of up to 3000 PSI. This higher strength reduces the need for a clinically clean surface, as the epoxy actually prefers to bond to a rough rusty surface. This 2 part epoxy sealer kit includes enough sealer to do 2 small or 1 large motorcycle fuel tank (more than enough needed to do an RD). This product has additional shipping charges. Kit comes with complete instructions.
-
Crampbuster cruise assist. Let the weight of your hand do the work of holding the throttle open while you ride. Relief from numbness and cramps. Slips on in seconds, no tools required.
-
Crankcase Breather - Yamaha RD250/350/400/R5/RZ350. Orignial Yamaha OEM part no. 583-15371-00-00
-
Crankcase Breather - Yamaha RD250/350/400/R5/RZ350. Reproduction part replaces Yamaha part no. 583-15371-00-00
-
Designed to check for air leaks in 2-stroke engines. Includes air pressure gauge, pump-up bulb, fittings and adapters for the RD250/350/400, R5 or DS6/7 twin cylinder 2-stroke motorcycle engines. Packed in a convenient carry satchel, complete with instructions. Made in the U.S.A. Economical price. This is the perfect leak down test kit for the RD350, RD400, R5, and DS7. Kit includes gauge, exhaust port plugs, intake plugs, and a hand squeeze bulb so no external air source is needed. The gauge is very sensitive so that even the smallest leak will be immediately obvious. The exhaust port plugs are quality metal/rubber pieces making blocking off the exhaust ports easy. The kit is complete with instructions and packaged in a neat little case for storage. If you are having a tuning issue or have just pulled an old RD out of long term storage, a leak down test is key!!
-
Spring Installation tool. Professional quality T-handle spring puller provides a secure comfortable grip for maximum leverage. Allows mechanics to remove exhaust springs as well as other springs in seconds
-
Foam Lever Covers. Comfortable black foam brake/clutch lever covers reduce hand slip, vibration and fatique. Sold in pairs.
-
Test the integrity and strength of your ignition system. Spark gap is adjustable from 0 to 10mm. Measure spark strength. Will test the ignition on most motorcycles, watercraft, ATVs & snowmobiles
-
Out of stockKREEM Tank Liner works great on any old and rusty tank.
-
Magnetic Oil Drain Plug for RD's/R5/DS7/RZ350. Also fits most Yamaha motorcycle from the 60's through the mid 80's. Magnetic oil drain plug collects metal particles and debris protecting your engine from damage. Includes washer. M14 x 1.5 (pitch) x 15mm long (threaded portion of bolt and magnetic tip).
-
Metal Quick Disconnect Fuel Coupling with dual shutoff in 3/16", 1/4" or 5/16". When connected fuel will flow & when disconnected fuel will not flow from either side. Use Dual shut-off for fuel tanks equipped with a cross-over line. Feature stainless springs, pin, and latch. These quick disconnect fittings utilize Viton o-rings and may not be compatible with some race fuels. Choose size and click add to cart.
-
Long-filament fiberglass made especially for 2 stroke muffler packing, suitable for aftermarket expansion chambers, Measures 10.5" x 16", more than enough to repack virtually any 2-stroke silencer. Resists breakdown up to 1200 degrees F. Made in the U.S.A.
-
Designed to check for air leaks in 2-stroke engines. Includes air pressure gauge, pump-up bulb and most fittings and adapters for single and twin cylinder 2-stroke motorcycle engines. Packed in a convenient carry box, complete with instructions Made in the U.S.A. This tool is avaialble for rent from Economy Cycle $75/$300 deposit. Please call if interested 224-430-7971
-
For use when tuning a motorcycle with the gas tank removed. Includes 4Í of 1/4î fuel line and an in-line fuel petcock. Holds up to 2,000cc or 1/2 gallon of fluid.
-
Jumper cables made specifically for motorcycle and powersports use.
-
Plastic Repair Kit, by ThreeBond - Repairs broken or cracked hard-to-bond plastic quickly and economically. Ideal for motorcycle body plastic, mounting tabs, brackets, snowmobile and watercraft hoods, etc. No mixing required, kit includes glue, primer, accelerator, glue remover, sandpaper, fiberglass and application sticks.
-
Quick Disconnect Fuel Coupling with dual shutoff in 1/4" or 5/16". When connected fuel will flow & when disconnected fuel will not flow from either side. Use Dual shut-off for fuel tanks equipped with a cross-over line. Capable of withstanding temperatures of -40 degrees F to 180 degrees F. These quick disconnect fittings utilize Nitrile (Buna N) o-rings and may not be compatible with some race fuels. Made in the U.S.A. Choose size and click add to cart. We recommend keeping as little slack as possible in the crossover line to keep the coupler up and away from the heat of the engine.
-
Racing Magnetic Oil Drain Plug for RD's/R5/DS7/RZ350. Also fits most Yamaha motorcycle from the 60's through the mid 80's. Magnetic oil drain plug collects metal particles and debris protecting your engine from damage. Includes washer.
- Predrilled holes for easy safety wiring
- Kit comes complete with pre drilled cap and locking clip already safety wired to a mounting tab
- Strong embedded magnet
- CNC from high quality aluminum
- Anodized in Black or Blue
-
RZ350 Thermo Sensor - Canadian Models - All years. OEM Part.
-
RZ350 Thermo Sensor - Canadian Models - All years. Aftermarket Part. (tapered threads)
-
RZ350 Thermo Sensor - US Models - All years. Reproduction part, no longer available from Yamaha. Replaces Yamaha part no. 48H-85790-00-00.
-
RZ350/RD350YPVS Thermostat - All years. Reproduction part. Temp 71C.
-
Spark Plug Wrench - 3 Way 14mm/12mm/10mm. Sold each.
-
Throttle Grip Washer (goes between throttle and switch housing). Can be used with all RD's R5's DS6/7 & most bikes with standard 7/8" Grips. Part no. 90201-261L1, washer plate These are often missing causing the throttle to return slowly or not all.
-
Yamaha RD250 RD350 RD400 R5 RZ350 & Others - Shift Cam (Drum) Bearing
