- Yamaha no longer makes the replacement headlight bulb for the RD's
- This is an option to replace the original 162mm headlight
- Comes with a H4 bulb 60/55w
- The light is held in place with clips and the side to side adjuster is deleted.
- Applications
- Any motorcycle with a 162mm headlight
- Yamaha R5, DS7 1970-1972
- Yamaha RD350, RD250 1973-1975
- Yamaha RD400 1976-1980
- Note: Clips for this headlight can be found here Headlight Clips
-
New Replacement Headlight for Yamaha RD R5 DS7
-
360 Degree LED Tail light Bulb - Clear, Sold Each. Dual Function Brake/Tail light. 360 degree design allows for illumination of the license plate. 12V bulb produces a bright LED glow. Replaces standard 1157-style bulb. LEDs draw extremely little electricity, are vibration resistant and last up to 10,000 hours of use. Sold each
-
Replacement turn signals. Nice quality aluminum bodied turn signals give any vintage bike and updated look. Available with amber or smoke lens. Dimensions approx 3.3"x1.4". Look great on an RD/RZ/R5. These have a bright 12V incandescent light but are technically classified as marker lights, check your local laws for applicability. Sold in pairs. Choose lens color and click add to cart.
-
Aluminum Turn Signals - Black body /Smoke lens (pair).
-
Replacement turn signals. Nice quality aluminum bodied turn signals give any vintage bike and updated look. Clear lens with amber bulb. Dimensions approx 3.3"x1.4". Look great on an RD/RZ/R5. These have a bright 12V incandescent light but are technically classified as marker lights, check your local laws for applicability. Sold in pairs.
-
DOT certified Turn Signals. Nice update for the RD turn signal, smaller than original with more up to date styling. Black body/Amber lens. Universal fit can be used front/rear, left/right. Not a bolt on direct replacement, you'll need to determine wiring and mounting as with any aftermarket signal. Note stems are short on these signals. Replacement lenses available. Sold in pairs. If you want stock bolt on signals see here RD Signals Stock Replacement
-
Economy Cycle Carabiner Flashlight. Handly little LED flashlight - small enough to keep in the bike's toolbox or on your keychain (battery doesn't activate until you remove the paper disc on the battery before use). Green annodizied aluminum body with small carabiner & Economy Cycle logo (approximately 4" long w/carabiner).
-
Reflector - Amber with black backing, 5mm stud - Great for RD's. Diameter approximately 60mm/2.38" - Made in Taiwan. Replaces Yam OEM No. 355-85111-01-00.
-
Flasher Relay - 12V 2 prong for 21-23W bulbs. By K&L. Replacement flasher for RD350/250/R5. You can use this flasher on the RD400 but you will lose the self cancelling function.
-
Flasher Relay - 12V 3 prong for 21-23W bulbs. By K&L. Note this is not the same 3 prong flasher in the RD400 and will not function the same. You can use the standard 2 prong flasher we have here on the site for the RD400 and your signals will flash, however you will lose the self cancelling function. Original OEM Yamaha flashers for the 400 are still available but in excess of $170. We can order the original flasher for you, please contact us via customerservice@economycycle.com
-
Tube type fuses - available in 5,7.5,10,15,20,25,30 amps. Quantity = number of fuses desired. Choose amp size, quantity and click add to cart.
-
Tube type fuses Short - available in 10 or 20 amps. These fuses are 1.0" long, same as stock OEM size for the RD's/R5/DS6/7. Quantity = number of fuses desired. Choose quantity and click add to cart.
-
Halogen Headlight Bulb 12V/35/35W- RD350/250/R5/DS7. Note: This bulb is for the replacment headlight assembly we sell here on the site, Part no. 12-1076.
-
Headlight Assembly – 6.25″
$66.95Headlight Assembly - 6.25" includes Bucket, Lens, Bulb and Chrome Ring (Great replacement for the RD, easy fit) Black or Chrome -
Instrument Dash Light Bulb Speedo/Tach RD(all) R5 12V Sold in Pairs
-
LED Instrument Dash Light Bulb Speedo/Tach RD(all) R5 Bright White - 4watt/12V. Sold Each. Note: RD250/350 uses 9x of these, RD400 uses 8x. Replaces Yamaha OEM 123-83516-21-00 Need new sockets / harness? see here Instrument Light Socket
-
LED Load Equalizer
$39.50Dual Load LED Equalizer. Allows LED turn signals to operate in place of stock incandescent bulb turn signals without replacing the flasher module. Will flash at correct rate. Easy installation, simply splice into existing turn signal system. -
LED Tail light - Tail, Brake & License Plate Functions. Super compact, modern design. 6 ultra bright LED tail lights and 9 mini LED license plate lights. Measures 4" wide x 1.25" high x 1.5" deep.
-
LED Tail light Bulb - Clear, Sold Each. Dual Function Brake/Tail light. 12V bulb produces a bright LED glow. Replaces standard 1157-style bulb. Sold each
-
Motorcycle LED Mulit-function Brake/Running/License Tail light. 34 LED tail lights, 2 LED license plate lights.
-
Need a solution for your original RD Headlight? We have one with a replaceable H4 Halogen Bulb. Click on details below and scroll down to descprition.
-
Rear Tail Light Assembly - RD400 (all years). Complete assembly, lens, base, bulbs, gasket, etc. Reproduction Part.
-
Rear Tail Light Lens - RD350 RD250/R5/DS7 (341-84721-60-00)
-
Rear Tail Light Lens - RD400 (all).
-
Reflector - Amber with black backing, 5mm stud - Great for RD's. Diameter approximately 60mm/2.38" - Made in USA, DOT Certified. Sold each. Replaces Yam OEM No. 355-85111-01-00
-
Reflector – Red
$4.95Reflector - Red with black backing, 5mm stud - Great for RD's. Diameter approximately 60mm/2.38" - Made in USA, DOT Certified. Sold each. -
Replacement bulbs for K&S Aluminum Marker Lights - Clear or Amber. Sold each. Dual Filament function for marker and signal.
-
Replacement bulbs for K&S Aluminum Marker Lights - Clear or Amber. Sold each. Single filament function for signal only.
-
Tail Light Bulbs RD(all) R5, sold in pairs. High quality 12V Dual filament bulb by General Electric. Bright 32 Watt output.
-
Turn signal grommet 90480-18488 RD250 RD350 RD400 (1976-1978) Sold each.
-
Black universal headlight brackets. Adjustable to fit 31mm-38mm fork tubes. Bracket arms are 4″ long, 3.5″ to mounting hole.
-
Chrome universal headlight brackets that will fit most front forks in 34mm-38mm, suitable for RD250/350/400/RD/DS7. Includes all mounting hardware and rubber bushings. Can be used with or without bushings.
-
Chrome universal headlight brackets. Adjustable to fit 31mm-38mm fork tubes. Bracket arms are 4" long, 3.5" to mounting hole.
-
Yamaha Grommet no. 90480-16501-00 RD400F Daytona, XS650/850 & Others - OEM Part. Sold Each.
-
Yamaha RD Headlight Mounting Kit. These parts are no longer available from Yamaha, this is a high quality reproduction kit and includes reproductions of the Yamaha part numbers listed below. Note this kit is made for the stock head and stock turn signals. Includes: 498-81464-60-00 x 2 Outer rubber damper (rubber) 498-84163-60-00 x 2 Inner rubber damper (rubber) 498-84145-60-00 x 2 Collar insert (plastic)
-
New Replacement Headlight Clips - pack of 4 For securing headlight lens in headlight bucket. Universal type clips works with many headlights/buckets. Replaces the following Yamaha part numbers
- 507-84324-60-00
- 1UY-84124-00-00
- 5G2-84324-A0-00
- 55X-84124-00-00
- 1UY-84124-00-00
-
Yamaha RD Replacement Turn Signal. High quality reproduction turn signal for RD's and various other Yamaha models from the mid to late 70's. Not exact duplicates of original but close. DOT approved, can be use front/rear, left/right. Chrome finish/amber lens. Replacement lenses available. Sold each.
-
Yamaha RD Replacement Turn Signal Collar - Front 360-83316-00. Sold each. Fits RD250/350/400
-
Yamaha RD Replacement Turn Signal Collar - Rear 360-83326-00. Sold each. Fits RD250/350/400
-
Yamaha RD Replacement Turn Signal Lens, available in Amber or Red. High quality reproduction replacement turn signal lens for RD's and various other Yamaha models from the mid to late 70's. DOT approved, sold each. Choose lens color and click add to cart.
-
Yamaha RD400 1976/1977 & RD250/350/R5 - Rear Tail Light Damper Replaces OEM 214-84553-01-00
-
Yamaha RD400 1978 & 1979 Rear Tail Light Damper Replaces OEM 1A2-84753-00-00
-
Yamaha RD400 C/D/E/F OEM Flasher Relay (different in shape from original but updated to this part by Yamaha for all RD400's)
-
Yamaha RD400 Tail Light Base 1A0-84712-60 Sheet, Base. This rubber part goes between the bracket and light. Reproduction part no longer available from Yamaha.