-
Oil Pump Rebuild Kit RD250/350/400 R5/LC350/YDS6/7 & Most Yamaha Oil Pumps from the 60's,70's & 80's Comprehensive kit - includes seals, gaskets, and screws. Covers most vintage Yamaha Motorcycle Oil Pumps from the 60's,70's and 80's Includes the following seals: Main, Priming wheel, Shaft, Piston (includes 3 sizes) Indludes the following gaskets: Main Pump Body, Pump to Case, and Bleed screw Includes new proper JIS (Japanese Industrial Standard) screws for pump body and bleed screw Includes Economy Cycle Oil Pump Rebuild Guide Not Included: Plug for pumps without a priming wheel (later 400's & RZ350) These rarely need replacing, the rest of the kit will work with these type pumps Satisfaction guaranteed or your money back One year warranty against manufacturing defects -
Yamaha RD350/400/250 Oil Line. OEM Yamaha oil line approximately 28", enough to do both carbs. Yamaha OEM no. 90445-05M07-00. The RZ350 requires 2 packages of this oil line. -
Yamaha R5 Oil Pump - Rebuilt / Restored
-
This pump has been completely rebuilt and restored by Economy Cycle
-
Fully disassembled and Ultrasonically cleaned
- Media blasted (lightly blasted to remove surface grime yet maintain the look of the original casting)
-
All seals and gaskets replaced
- Hardware replaced - pump body screws and bleed screw
- Re-assembled and shimmed to spec
- Also included are the pump to engine cover gasket and oil pump shaft seal
- Pump is ready to mount, bleed and run
- Free tech support if you have any pump questions or need help
-
-
Yamaha RD250/350/400/RZ350 (all) Oil Pump Gasket. - Genuine Yamaha 126-13116-01-00 -
Yamaha RD250/350/400/RZ350 (all) Oil Pump Gasket. - High quality replacement reproduction gasket, replaces Yamaha OEM 126-13116-01-00 -
Yamaha RD350 Oil Pump - Rebuilt / Restored
-
This pump has been completely rebuilt and restored by Economy Cycle
- Later pump from 1975 that uses the fine tooth worm gear (see pics)
-
Fully disassembled and Ultrasonically cleaned
- Media blasted (lightly blasted to remove surface grime yet maintain the look of the original casting)
-
All seals and gaskets replaced
- Hardware replaced - pump body screws and bleed screw
- Re-assembled and shimmed to spec
- Also included are the pump to engine cover gasket and oil pump shaft seal
- Pump is ready to mount, bleed and run
- Worm drive shaft not included
- Free tech support if you have any pump questions or need help
- Additonal pictures in product detail/below
-
-
Yamaha RD400 Oil Pump - Rebuilt / Restored
-
This pump has been completely rebuilt and restored by Economy Cycle
- Fully disassembled and Ultrasonically cleaned
- Vapor blasted externally
-
All seals and gaskets replaced
- Hardware replaced - pump body screws and bleed screw
- Re-assembled and shimmed to spec
- Also included are the pump to engine cover gasket and oil pump shaft seal and shaft thrust washer
- Pump is ready to mount, bleed and run
- Worm drive shaft not included
- Free tech support if you have any pump questions or need help
- More pictures below
-
Call Us Today! 1 (224) 430-7971|customerservice@economycycle.com
