-
Banjo Bolt Dust Cover For Front Master Cylinder - Fits RD's & most bikes -
Banjo Bolt Single Line - Multiple Sizes. 10x1.25 and 10x1.0. Note: RD F/R Master cylinder and Rear Caliper use 10x1.25, RD Front Caliper uses 10x1.0, except Daytona which uses 10x1.25 F/R. -
Banjo Bolt Washer - 10mm, copper. Sold each. -
Brake Bleeder Valve Caps, sold in pairs -
Brake Bleeder Valve Caps - Vintage Style - set of 2 caps -
Brake Light Banjo Bolt Pressure Switch. Single line. Available in 2 sizes. Note: 10x1.25 for RD Front/Rear Master Cylinder & Rear Caliper Note: 10x1.0 for RD Front Caliper (except Daytona - see below) Note: 10x1.25 for RD400F Daytona caliper Front and Rear Note: 10x1.0 for Magura Front Master Cylinder Note: 10x1.0 for RD reproduction Calipers Front and Rear -
Brake Light Banjo Bolt Pressure Switch Cover Boot. For use with pressure switch banjo, not standard banjo. 90 degree black rubber boot. Sold each. Switch sold separately. -
Brake Pad Shims, sold in pairs - RD250/350/400(C/D/E. Reproduction part no longer available from Yamaha. Replaces Yamaha part numbers:- 306-25827-02-00, 306-25827-03-00, 306-25827-04-00
- 306-25828-02-00, 306-25828-03-00, 306-25828-04-00
-
Economy Cycle RD Banjo Bolt - 10x1.25 Note: RD350/400 F/R Master cylinder and Rear Caliper use 10×1.25 RD Front Caliper uses 10×1.0, except Daytona which uses 10×1.25 F/R. -
Goodridge Speed Bleed Nipples. Speed bleed nipples have a one way check valve that keeps air out of the lines when bleeding brakes. Makes brake bleeding a snap and one person job. Sold in pairs. Available in 8mm x 1.0 for all Yamaha RD's (except RD400F Daytona). The Daytona requires 8mm x 1.25. Yamaha RZ350 uses 8 x 1.0 -
RD/250350/R5/DS7 Rear Brake Actuator Rod Hardware. OEM Yamaha, includes Spring, nut and pin. -
RD400 (all) Rear Master Cylinder Dust Boot. Reproduction Part, sold each -
RD400 RD250 RD350 Front Master Cylinder Dust Boot 1A0-25831-00. Reproduction Part, sold each -
Universal Rear Drum Brake Switch. Great OEM replacement. Can be used on R5/RD250/350 with stock spring. -
Yamaha RD250 Front Brake Switch part no. 395-83980-09-00. also fits RD60,RD125, RD200,RD125,RD200,DT's. -
Yamaha RD250/350/R5/DS7 Rear Brake Shoe Spring. OEM Yamaha part. Sold each. -
Rear Brake Arm Spring. Connects rear brake pedal and frame. High quality reproduction spring, original part no longer available from Yamaha. Fits RD250/350/R5/DS7 (all years). -
Yamaha RD350 RD250 R5 (all years) Front Master Cylinder Reservoir Diaphragm 360-25854-00-00 - reproduction part no longer available from Yamaha. -
Front brake hard line for RD350 RD250 USA. This part is no longer available from Yamaha. This is a reproduction part. Replacement for OEM part no. 306-25871-00-00. Note: Some additional minor hand bending may be required for exact fit. -
Yamaha RD350 RD400 RD250 Front Master Cylinder Brake Spring for Lever 90501-10312-00, sold each. -
Yamaha RD400 (1976-78) BRAKE HOSE SUPPORT RUBBER 1A0-25881-01, reproduction part -
Yamaha RD400 (76-78) Front Master Cylinder Reservoir Diaphragm 1A0-25854-01-00 - reproduction part no longer available from Yamaha. -
Yamaha RD400 (all) Rear Brake Reservoir Hose. Special brake fluid compatible hose, approximately 6.5"/160mm, used to connect rear brake fluid reservoir to master cylinder. Reproduction item, no longer available from Yamaha. Great replacement for stock RD400 line. -
***OUT OF STOCK*** Yamaha RD400 (all) Rear Brake Reservoir Hose Spring. High quality reproduction spring no longer available from Yamaha. Replaces Yamaha OEM part no. 90501-10406. This spring is used to cover the brake fluid hose from reservoir to master cylinder. Reproduction item, no longer available from Yamaha. Replaces OEM # 90501-10406-00 -
Yamaha RD400/RZ350 Front Brake Switch. Reproduction Part. replaces OEM 26H-83980-00-00 and 1A0-83980-30-00 -
Front brake hard line for RD400US/RD250EURO. This part is no longer available from Yamaha. This is a reproduction part. Replacement for OEM part no. 1A0-25871-00-00. Note some additional hand bending may be required for exact fit.
Call Us Today! 1 (224) 430-7971|customerservice@economycycle.com
