-
Yamaha Brake Caliper Seal Kit - RD250/350/400 (73-78) XS TX. Includes main seals, dust seals, and small seal used between caliper halves and seal grease. Each kit services one caliper. Note: Yamaha no longer supplies red rubber grease packets witht he seal kit. This vegetable based grease is applied to the seals and helps keep them from seaping. Red rubber grease used on the seals will not contaminate your brake fluid. You can purchase red rubber brake grease at most automotive parts shops; However, most of the time, you can just lube the seals with brake fluid when rebuilding, but if you have any seaping after the rebuild then apply the red rubber grease to them. Note: This kit includes the small square section seal that fits between the caliper halves.
-
In-line Glass/Chrome Fuel Filter with replaceable element For 1/4" fuel line. 1-3/8" die-cast body.
-
Genuine K&N Air Filter for Y-boot air-filter system and for use with stock RD350 Y-boot(without air-box), includes clamp. Lifetime guarantee. Standard 5" for R5/RD350/250/400. See part YA-0700 for use with stock RD350 air-box.
-
Manifolds for 30-34mm Carbs(VM, TM, PWK, PJ) with Boost/Crossover holes. By UPP/Moose Racing, high quality material resistant to cracking or ripping, outperforms stock manifolds. Specifically formulated to resist harsh fuels (including methanol) and oils. Carb side opening i.d. accomodates 40mm carb spigot. Includes manifold gaskets & clamps. (recommended for use with larger 34mm carbs on RD350/400 or RZ350 applications). Perfect for use with boost bottle. Sold in pairs.
-
Uni Air-Box Vents. Uni's foam filtered air vents increase the amount of air to the air filter for a better air supply and improved performance. The removable foam element may be cleaned and re-oiled for years of dependable service. For street, dirt and atv applications, 2 or 4 stroke motors. Re-jetting may be required depending on application and number of vents installed. Easy to install, simply drill hole in air box and press in. 6 air vents in a package.
-
Yamaha RD250/350/400/R5/DS7 (all years) Upgraded Connecting Rod Big End Bearing. Yamaha part number 09263-22060. This flat caged silver plated big end bearing comes from the Suzuki RG500 Gamma, but is a perfect match for the Yamaha RD's and much stronger then the stock bearing. This bearing can be used with stock Yamaha rods or the ProX rods we sell here on the site. (sold each).
-
Wiseco Wrist Pin for Wiseco RD350/400 Pistons. 16mm/2.175" S486 by wiseco
-
Yamaha Reproduction Brake Caliper Seal Kit - RD250/350/400 (73-78) XS TX. Includes main seals, dust seals, and small seal used between caliper halves and seal grease. Each kit services one caliper.
-
Yamaha RD350/R5 Head Gasket (All years) - High quality copper reproduction head gasket, replaces OEM 278-11181-01
-
Yamaha RD400 (all) Engine Case Decal. Reproduction decal true to the original graphic. Orignials no longer avaiable from Yamaha. Sold each.
-
Brake Caliper Rebuild Kit - RD400F Daytona (Front / Rear). High quality seals from K&L. Each kit contains seals to rebuild one caliper.
-
Replacement element for our Glass/Chrome 1/4" fuel filter
-
Manifolds for 36-40mm Carbs(VM, TM, PWK, PJ). Mfg'd by UPP, high quality polyurethane, outperforms stock manifolds. Carb side opening i.d. accomodates 43mm carb spigot. Includes manifold gaskets & clamps. (recommended for use with larger 36-40mm carbs on RD350/400 or RZ350 applications). Sold in pairs.
-
UNI 2 Stage Pod Filter, for use on stock 28mm carbs found on Yamaha RD250/350/400s and RZ350s. 2 stage filter can be run oiled or dry. Can also be run oiled in single stage by removing outer sleeve.
-
Yamaha Handlebar Control Set Decal RD250/350(all US). Replaces decals on right and left handlebar switches. Reproduction decal true to original graphic.
-
Yamaha Handlebar Control Set Decal RD400(all). This is the correct decal set for USA RD400 1976-79 (C/D/E/F). Replaces decals on right and left handlebar switches. Reproduction decal true to original graphic.
-
Yamaha RD/350/400/R5 (all) Cylinder Base Gasket. Aftermarket made in Japan.
-
Yamaha RD350 RD250 R5 Engine Cover Gasket (clutch side) - high quality reproduction, replaces OEM Part no. 278-15461-02-00
-
Yamaha RD350/400/R5 (all years) Connecting Rod Small End (wrist pin) Bearing (Yamaha OEM). Original Yamaha OEM Bearing. Current Yamaha part number 93310-216E1-00. Sold each.
-
UNI Pod Filters for larger 30-38mm Carbs. Filter is available in single or dual stage with straight flange or angled flange. (note we recommend the single stage with angled flange for the best fit on the RD/RZ/R5)
-
Yamaha Brake Caliper Decal (RD1973-1977) - Aluminum with adhesive backing. Originals no longer available from Yamaha. Sold each.
-
Yamaha RD250 / DS7 (all years) Connecting Rod Small End (wrist pin) Bearing (Yamaha OEM). Original Yamaha OEM Bearing. Current Yamaha part number 93310-216L2-00. Sold each.
-
Yamaha RD250 DS7 (all years) Connecting Rod Small End (wrist pin) Bearing by Wiseco B1016, sold each.
-
Yamaha RD250/350/400/R5/DS7 (all years) Crank Pin. Sold each.
-
Yamaha RD400 (76-79) RZ350, Banshee, XS650, Rear Master Cylinder Reservoir Cap 2KF-25852-50-00, Genuine Yamaha.
-
Sale!Exhaust Gasket, 360-14714-00-00 (Between header and muffler. Reproduction part, sold each. 2 required per bike. Fits all years RD250/350
-
Y-boot Adaptors for Larger Mikuni Carburetors
- Install a Y-boot Filter kit on your Yamaha RD with Larger Carburetors
- Increase performance by reducing turbulance generated from pod filters
- Adapts our Y-boot filter kit to fit the larger aftermarket Carbs with a 58mm inlet housing
- Mikuni VM30-34
- Mikuni TM32-34
- Includes 2 adaptors and 2 clamps
- Made from Aluminum. In Lincoln NE, USA
- Sold as a pair
-
Yamaha RD250/350/400/R5/DS7 (all years) Connecting Rod Thrust Washer. Sold each.
-
Yamaha RD350 (all) Gear Selector Decal. Reproduction decal true to original graphic.
-
Yamaha RD400 (76-79) RZ350, Banshee, XS650, Rear Master Cylinder Reservoir 1A1-25894-01-00 Genuine Yamaha part.
-
Out of stockRed rubber grease (RGR) is used for repair, assembly and conservation of hydraulic brake components, apply thinly and evenly to cylinder sleeves, pistons, pins and seals. RGR rubber grease is compatible with DOT3/4 and 5.1 brake fluids. Contains Liquilon®, which lubricates long after conventional greases have washed out. Water repellent. Stands up to extremely high temperatures.
-
1975 RD250 & RD350 Warning & Small Decal Set Includes: 1 Battery Caution 1 RH Engine Case Decal 1 Caution Brake Lining 1 Front Brake Caliper 1 Gear Selector Decal
-
UNI UP-2229 High Performance Air Filter for RD125/RD200. Sold in pairs
-
Manifold / Reed Valve Gasket - for RD250/350/400. Reproduction gasket. Sold each. Note: Sample picture, actual gaskets may vary in color depending on supply.
-
Yamaha Master Cylinder Reservoir Diaphragm 360-25854-00-00 (all years) - RD400 Rear Master Cylider, RD350 Front Master Cylinder - Genuine Yamaha
-
Yamaha Reservoir Diaphragm Bushing - 2GU-25855-00-00-00 - RD400 Rear master cylinder, RD350 Front master cylinder - Genuine Yamaha part.
-
Oil Drain Plug Gasket - RD250/350/400/R5/DS7. Aftermarket part, thick fiber gasket similar to OEM but at a reasonable price. Sold each, or packs of 5 or 10. Replaces Yamaha OEM part no. 4F4-14766-00-00
-
Yamaha RD250/350/400/RZ350 (all) Oil Pump Gasket. - High quality replacement reproduction gasket, replaces Yamaha OEM 126-13116-01-00
-
Yamaha RD350 Carb Repair Kit by Sudco/Keyster 1973-1975, includes needle valve, gaskest, jets to rebuild carburetor.
-
Yamaha RD400 Carb Repair Kit by Sudco/Keyster (1976-1978) includes needle valve, gaskest, jets to rebuild carburetor.
-
Yamaha R5 Carburetor Rebuild Kit by Keyster All years
-
Yamaha RD250/350/400 Control Switch Hardware. Choose model and add to cart. Long lasting zinc finish. (sample picture)
-
Yamaha RD400 Right Control Switch. High quality reproduction part. Replaces original Yamaha part no. 1A0-83975-00-98 No modifications required, same wire colors / connections as original.
- Applications
- RD400 C/D 1976-1977
- RD400 E 1978 Can be used with modification to the wiring connections
- RD400 F Daytona 1979 Can be used with modification to the wiring connections, Light switch is not used
- Applications
-
Yamaha RD400 Left Control Switch. High quality reproduction part. Replaces original Yamaha part no. 1A0-83973-02-98 No modifications required, same wire colors / connections as original.
- Applications
- RD400 C/D 1976-1977
- RD400 E 1978
- RD400 F Daytona
- XS360 1976-1977
- XS500 1977-1978
- Applications
-
Yamaha RD350/RD250 Right Control Switch. High quality reproduction part. Replaces original Yamaha part no. 360-83975-03-00 No modifications required, same wire colors / connections as original. Applications:
- Yamaha RD250 1973-1975
- Yamaha RD350 1973-1975
-
Sale!Yamaha RD400F Daytona Intake Boots 2V0-14453-00-00 (pair)
-
Yamaha RD400F Daytona Intake Boots - Pair (Carb to Airbox Boots)
- Brand New Reproduction part - Originals no longer available from Yamaha
- Newly Manufactured, soft, flexible and true to the originals, restoration quality part
- Original Yamaha Part no. 2V0-14453-00-00
-
Fits 1979 Yamaha RD400F Daytona Only
-
-
Yamaha RD350/RD250 Left Control Switch. High quality reproduction part. Replaces original Yamaha part no. 360-83973-02-00 No modifications required, same wire colors / connections as original. Applications:
- Yamaha RD250 1973-1975
- Yamaha RD350 1973-1975
- RD125 1975-1976
- RS100 1975-1976
