- Ultra tough and durable material protects tubes
- Won't shift or move like rubber rim strips
- Self -adhesive backed for easy no mess installation
- Pre cut hole for valve tube
- Protects inner tube like no other rim strip
-
Armor Rim Strip Tape - by Motion Pro. Rim strip tape can be used in place of rubber rim strips and will not slip. Each package contains enough tape to do one wheel. Choose size and click add to cart.
-
We source these premium seals from Japan, by ARS, supplier to Yamaha & other OEM's. This is the same kit we sold for years under the Sudco brand. These are essentially the same seals Yamaha sells in their own packaging. Oil Seal Kit for Yamaha RD400/350/250. Seal kit includes all seals for bottom end (see note below). This kit includes 10 seals. (click on the picture for seal identification & sizes)
- Countershaft Sprocket Seal
- Crankshaft RH
- Crankshaft LH
- Kickstarter Shaft
- Shift Shaft (crankcase)
- Shift Shaft (outer cover)
- Clutch Push Rod
- Oil Pump Shaft
- Shift Fork Rod Plug x 2
-
Sale!Athena Big Bore Kit - RZ350/Banshee. Kit inlcudes: 2 aluminum 68mm cylinders with nickle carbide (nikasil) coating with large water jackets, high performance 68mm matched cast lite pistons kit includes rings, pin, clips, gasket kit, modular head with combustion domes with preconfigured squish and compression, cylinder studs, headbolts & washers, instructions included. CNC machined parts, true bolt on performance no modifications or machining needed. 68mm/392cc. 50+ rear wheel HP at 8k revs on stock crank/exhaust. Note for RZ350 installation: eliminates powervalves & requires modified exhaust (spigot type). Requires 2 Banshee water plugs, part no 47X-11355-00-00 available here on the site.
-
Complete engine gasket set for Yamaha RD250/350/R5 (all years) by Athena. Note: RD250 requires different head gaskets, also sold here on the site. Gasket set includes the following: Head gasket x 2 Base gasket x 2 Manifold (reed cage) gaskets x 2 Exhaust gaskets x 2 Right Crankcase cover gasket x 1
-
Banjo Bolt Dust Cover For Front Master Cylinder - Fits RD's & most bikes
-
Banjo Bolt Single Line - Multiple Sizes. 10x1.25 and 10x1.0. Note: RD F/R Master cylinder and Rear Caliper use 10x1.25, RD Front Caliper uses 10x1.0, except Daytona which uses 10x1.25 F/R.
-
Banshee water plug, part no. 47X-11355-00-00, required when installing Athena big bore kit on an RZ350. Sold each, 2 required for RZ350.
-
Sale!Bar End Cafe Style 3" Round Mirror Set (pair). Fits Yamaha RD/RZ and any bike with 7/8" handlebars. Vibration free rubber mounting with double ratchet stop adjustabiltiy. One of our most popular products includes one pair of mirrors Right/Left.
-
Sale!Bar End Cafe Style 3" Round Mirror Set (pair). Fits Yamaha RD and any bike with 7/8" handlebars (Open end with no screw inserts). Vibration free rubber mounting with double ratchet stop adjustabiltiy. This version allows additional adjusment of the mirror angle. One of our most popular products includes one pair of mirrors Right/Left.
-
Bar End Cafe Style Oval Mirror - Black R/L. Fits Yamaha RD/RZ and any bike with 7/8 or 1" handlebars. Medium flat convex mirror reflects larger image. Heavey duty internal expanding bar end mounting system fits 7/8 or 1" bars. Adjustable for right or left application. Ratchet and ball assembly ensures minimum vibration and easy installation. Sold Each.
-
Bar End Cafe Style Rectangular Mirror - Black R/L. Fits Yamaha RD/RZ and any bike with 7/8" handlebars. Vibration free rubber mounting with double ratchet stop adjustabiltiy. Fits left or right side.
-
Bar End Weights - Anti Vibration - Multiple Colors. For 7/8" bars. Note: To use these on an RD, you will need to remove the end of the throttle tube and use open ended grips. Made of anodized aluminum. Available in Blue, Silver, Black, Red (not pictured), Purple. Sold in pairs. Choose color and click add to cart.
-
Barnett High Performance Kevlar Clutch Kit RD350 RD400 RD250 R5. Includes Kevlar friction plates, steel drive plates, and heavy duty springs. High performance clutch kit for the Yamaha RD350.
-
Barnett Clutch Kit Yamaha RD350LC (All), includes 7 Kevlar friction plates, 6 steel drive plates, 6 heavy duty springs. High performance clutch kit for the Yamaha RD350LC.
-
Barnett Clutch Kit Yamaha RZ350 (All Years), includes 7 Kevlar friction plates, 6 steel drive plates, 6 heavy duty springs. High performance clutch kit for the Yamaha RZ350.
-
Battery Box Damper For RD400 (all years). Sold each. No longer available from Yamaha, replaces OEM part no. 1A0-21746-01-00. High quality reproduction rubber part.
-
Battery Box Damper Set - For RD250/350/400/R5/DS7. Sold as a set of 4 dampers. High quality reproduction rubber part.
-
Battery Eliminator by Zeeltronic. Battery eliminator is an electrolyte capacitor (30000-45000uF/25V) and works on most bikes with CDI ignitions. This does not work with bikes with points/condensor/magneto type ignitions. For instance, this eliminator will work with the RZ350 but will not work with the stock RD350/400 ignition. Not recommend for use with the Powerdynamo ignition.
-
Battery Lead / Terminal Cover. Used to cover the battery terminal leads.
-
Beston Style Vintage Grips for 7/8" bars. Vibration absorbing for comfortable grip. Now available in 2 sizes, short 4.75" (120mm) or long 5.25" (135mm). Sold in pairs.
-
Billet Aluminum Reservior Cap for RZ350 - Replace your stock
-
Billet Aluminum Reservior Cap for RZ350 in Chrome - Replace your stock
-
Professional-Quality 3M Scotch-brand Super 33+ black vinyl electrical tape.
-
Black plastic bolt head cap covers for metric socket head (allen) in sizes M8 or M6. Makes for a nice clean look. Sold each. These simply press in to the bolt head, easy to remove. note; Size M8 (for RZ handlebar risers and other M8 Allen head bolts), Size M6 (for RD/RZ engine case bolts and other M6 allen head head bolts)
-
Boost Bottle for RD250, RD350, all years, RDLC350 1980-1982, RZ350 all years, Banshee all years. Increased performance, throttle response, carb balance, stores fuel charge for additional power. All Aluminum body with leak proof nipples. Approximate dimensions 2 in. x 6.25 in. Requires cross over type manifolds (RZ style - sold in our manifolds category product 005-835 for stock 28mm carbs, or 005-836 (by UPP) for 30-34mm carbs, or 1050-0057 (by Moose) for 30-34mm carbs).
-
Boyesen Power Reeds - Yamaha RD250/350/400 and RD250/350LC Boyesen's patented dual-stage design incorporates a specially shaped top reed and ported bottom reed. The top reed is lightweight and resilient for crisp throttle response at partial throttle or low RPM. The stiffer, bottom reed is ported to provide maximum flow and horsepower at higher RPM. More Airflow, More Air Velocity, More overall Power. Includes 2 sets of reeds.
-
Boyesen Power Reeds - Yamaha RZ350/250, RD250/350 YPVS, LC400,RZ400. Boyesen's patented dual-stage design incorporates a specially shaped top reed and ported bottom reed. The top reed is lightweight and resilient for crisp throttle response at partial throttle or low RPM. The stiffer, bottom reed is ported to provide maximum flow and horsepower at higher RPM. More Airflow, More Air Velocity, More overall Power. Includes 2 sets of reeds.
-
This Brake Bleeder Kit makes bleeding your RD brakes a snap and saves a lot of time and frustration. Durable metal pump quickly removes air, bubbles and gets the lines full of fluid. Multiple use tool for motorcycles, automotive and marine applications. This kit features extra-long 23-3/4" hoses and a myriad of adaptors, which makes this the choice for the professional or for the serious home mechanic. It features an all-metal construction body, heavy-duty pump and protective rubber gauge cover for durability and impact absorption. Comes in a sturdy, protective carrying case.
-
Brake Bleeder Valve Caps - Vintage Style - set of 2 caps
-
Brake Caliper Seal Kit - RZ350 Front. Not available from Yamaha. Each kit contains 2 high quality aftermarket seals required to rebuild one caliper. Original OEM seals are only available with the Yamaha Seal/Piston kit.
-
Brake Caliper Seal Kit - RZ350 Front/Rear (Non-USA Models with 2 Piston Caliper). OEM part number 51L-W0047-00. Click on picture and scroll down for Yamaha OEM diagram.
-
Brake Caliper Seal Kit - RZ350 Rear - USA versions. Genuine Yamaha Seals. Each kit contains seals to rebuild one caliper - Rear. Note: This kit does not include the small square section oring seals that go between the caliper halves. See here for this part Oring seals for RZ
-
Brake Caliper Seal/Piston Kit - RZ350 Front. Genuine Yamaha Seals. Each kit contains one piston and seals to rebuild one caliper. Yamaha does not sell the seals by themselves, only with the piston.
-
Brake Hose Set for Yamaha RD250 and RD350, high quality reproduction, no longer avaiable from Yamaha. Replaces OEM 360-25872-05-00 & 351-25873-05-00
-
Brake Lever for Yamaha RZ350 - Black. Replaces Yamaha OEM 31A-83922-00-00.
-
Brake Lever for Yamaha RZ350 - Yamaha OEM 31A-83922-00-00
-
Brake Light Banjo Bolt Pressure Switch. Single line. Available in 2 sizes. Note: 10x1.25 for RD Front/Rear Master Cylinder & Rear Caliper Note: 10x1.0 for RD Front Caliper (except Daytona - see below) Note: 10x1.25 for RD400F Daytona caliper Front and Rear Note: 10x1.0 for Magura Front Master Cylinder Note: 10x1.0 for RD reproduction Calipers Front and Rear
-
Brake Light Banjo Bolt Pressure Switch Cover Boot. For use with pressure switch banjo, not standard banjo. 90 degree black rubber boot. Sold each. Switch sold separately.
-
Brake Line Kit - RD250(76-78)/RD350/RD400(76-78) Front Braided Stainless Steel Kit includes braided stainless steel line with cover, banjo bolt, washers and adapter. Line runs from master cylinder to hard line with stock bars or can run direct to caliper with lower bars. By Galfer. Available with clear or black covers. Note for RD350, if running this line to the caliper by passing the manifold and hard line, you'll need a banjo bolt pressure switch to activate the brake light, available here Banjo Bolt Pressure Switch
-
Brake Line Kit - RZ350 Front Braided Stainless Steel. 2 Line kit runs from master cylinder to caliper. Kit includes braided stainless steel line, banjo bolts, and washers.
-
Brake Line Kit - RZ350 Front Braided Stainless Steel. 3 Line kit replaces stock brake lines. Kit includes braided stainless steel lines, banjo bolts, and washers.
-
Brake Line Kit - RZ350 Rear Braided Stainless Steel. Kit includes braided stainless steel line, banjo bolts, and washers.
-
Brake Line Kit - RD400 (C/D/E models 76-78) Rear Braided Stainless Steel. Kit includes braided stainless steel line, banjo bolt, and washers. By Galfer. Available with clear or black covers
-
Brake Master Cylinder Rebuild Kit - RZ350 Front (Non-USA Models) OEM# 36Y-W0041-00. Click on picture and scroll down for Yamaha OEM diagram.
-
Brake Master Cylinder Rebuild Kit - RZ350 Rear (Non-USA Models) OEM# 29L-W0042-50. Click on picture and scroll down for Yamaha OEM diagram. Note: Part number 29L-W0042-50 has been superseded by number 4GY-W0042-00-00.
