-
Brand new fresh rubber cush drive for Yamaha RD350 RD250 R5 DS7. Replace your dry-rotted and cracked 30 year old cush drive with newly manufactured OEM replacement. This is an often over-looked part that needs replacing on older bikes and enhances performance, reliability (reduces wear on chain, gears and clutch) and results in a smoother ride and better handling bike. Reproduction part no longer available from Yamaha. Replaces original Yamaha part no. 278-25364-00-00
-
Yamaha RD350 RD250 BRAKE HOSE SUPPORT RUBBER 341-25881-00 BRAKE HOSE PROTECTOR, upper for hard line/brake manifold
-
Brand New Clutch Cable - RD250/350 All years, Excellent quality reproduction cable. Replaces Yamaha OEM Cable 360-26335-00-00
-
Yamaha RD350/250/R5/DS6/7 Counter Shaft Sprocket Lock Washer. Original Yamaha Part.
-
Yamaha RD400 (1976-78) BRAKE HOSE SUPPORT RUBBER 1A0-25881-01, reproduction part
-
Yamaha RD350 RD250 RD400 RZ350 Banshee DS6/7 R5 Counter Shaft Sprocket Nut. Original Yamaha Part.
-
Yamaha RD350 RD250 Side Cover Molding, Left side, sold each. No longer available from Yamaha this high quality reproduction part is true to the original pattern and black plastic material.
-
Yamaha RD350 RD250 Side Cover Molding, Right side, sold each. No longer available from Yamaha this high quality reproduction part is true to the original pattern and black plastic material.
-
Yamaha RD350 RD250 Throttle Cable Assembly for high top carbs (see pics below for reference). High quality reproduction cable no longer available from Yamaha. Includes upper cable, junction tube, lower cables to carbs, and oil pump cable. This cable assemly comes with 2 sets of lower cables to accomodate boht types of high top carbs. Note: See pictures of high top carbs with brass adjusters below. This cable assembly works with both types of carb tops pictured. If you have low top carbs with the small straight adjusters then see our Low top carb cable here, Low Top Carb Throttle Cable
-
Yamaha RD350 RD250 Throttle Cable Assembly for low top carbs. High quality reproduction cable no longer available from Yamaha. Includes upper cable, junction tube, lower cables to carbs and oil pump cable. Note: See picture of low top carb with straight adjuster below. If your carbs don't match the picture below than see our High Top Cable here High Top Carburetor Cable
-
Front brake hard line for RD350 RD250 USA. This part is no longer available from Yamaha. This is a reproduction part. Replacement for OEM part no. 306-25871-00-00. Note: Some additional minor hand bending may be required for exact fit.
-
Yamaha RD350 RD400 RD250 Front Master Cylinder Brake Spring for Lever 90501-10312-00, sold each.
-
Yamaha RD350 High Performance Sintered Metal Brake Shoes by DP - Rear brake shoes. #1 in brake pad shootout tests, DP Brakes were rated #1 in Germany's Motorrad magazine and England's Motorcycle News. Get high-tech performance in all conditions for your motorcycle with DP Brakes brake pads and shoes. Sintered metal dust-free compound design gives superior performance for consistent, hard stops and fade-free performance. Brake pads and shoes have a quick break-in period so you get maximum performance fast. Sintered metal compounds will outlast more organic or Kevlar® pads. Premium-quality, asbestos-free shoes from DP Brakes. Excellent durability and overall braking performance
-
Yamaha RD350(all) Throttle Tube. Genuine Yamaha part 214-26243-00-00
-
Yamaha RD350/400/250 Oil Lines Kit - Reproduction kit includes 4 oil line clamps & enough hose to run both oil lines from the oil pump to the carbs. This oil line does not collapse under pressure and has the same ID (inner diameter) as the original line. Available in Black or Clear lines. Choose Color and click add to cart.
-
Yamaha RD350/400/250/R5/RZ350/DS7/LC350 Shift Shaft Seal. LH side, Sold each. Genuine Yamaha Seal.
-
Front Sprockets - RD350/RD250 (all years 73-75), choose size below. (Sprockets manufactured by JT))(picture may vary from actual sprocket). Choose sprocket size and quantity, then click add to cart.
-
Yamaha RD350/RD250 Rear Sprocket (73-75), by JT, 39 Teeth (picture may vary from acutal sprocket)
-
Yamaha RD400 (1976-1978) Tool Box - Reproduciton includes bracket for strap.
-
Yamaha RD400 (1976-78) BRAKE HOSE SUPPORT RUBBER 1A0-25881-01, reproduction part
-
Yamaha RD400 (76-78) Front Master Cylinder Reservoir Diaphragm 1A0-25854-01-00 - reproduction part no longer available from Yamaha.
-
Yamaha RD400 (All Years) Foot Peg Clevis Pin Set. 8mm x 34 pin, zinc plated steel, w/cotter pins. (sold as a set of 2 pins/cotter pins). Replaces 90243-08006-00.
-
Yamaha RD400 (all) Rear Brake Reservoir Hose. Special brake fluid compatible hose, approximately 6.5"/160mm, used to connect rear brake fluid reservoir to master cylinder. Reproduction item, no longer available from Yamaha. Great replacement for stock RD400 line.
-
***OUT OF STOCK*** Yamaha RD400 (all) Rear Brake Reservoir Hose Spring. High quality reproduction spring no longer available from Yamaha. Replaces Yamaha OEM part no. 90501-10406. This spring is used to cover the brake fluid hose from reservoir to master cylinder. Reproduction item, no longer available from Yamaha. Replaces OEM # 90501-10406-00
-
🏍️ Yamaha RD400 Speedometer / Tachometer Mounting Kit – All Years Bring your dash back to life with this complete rebuild kit designed specifically for all Yamaha RD400 models. Whether you're restoring a classic or fine-tuning your daily rider, this mounting kit delivers factory-style precision with modern durability. ✨ Kit Includes:
- Correct reproduction rubber grommets for authentic fit and finish
- Full set of stainless 18-8 hardware for corrosion-resistant strength
- Everything needed for a clean, secure install—no guesswork, no extra trips to the hardware store
-
Yamaha RD400 (C/D/E 1976-1978) Cush Drive Bushing. Reproduction part no longer available from Yamaha. Sold each
-
Yamaha RD400 (C/D/E/F) Throttle Tube Original Yamaha OEM 1GU-26243-00-00
-
Yamaha RD400 (C/D/E/F) Throttle Tube Reproduction 1GU-26243-00-00
-
Yamaha RD400 - Electrical Panel Grommets 90480-13018 Reproduction Part
-
Yamaha RD400 - Electrical Panel Grommets (3 required per bike). OEM part. 90480-13018-00
-
Yamaha RD400 1976-78 Fork Boots, Genuine Yamaha Part, Sold in pairs
-
Yamaha RD400 1976-79 Fork Boots, Reproduction, Sold each. These boots work with both 34mm & 35mm forks. Replaces Yamaha part no. 584-23144-50 & 1T3-23144-50
-
Yamaha RD400 1976/1977 & RD250/350/R5 - Rear Tail Light Damper Replaces OEM 214-84553-01-00
-
Yamaha RD400 1978 & 1979 Rear Tail Light Damper Replaces OEM 1A2-84753-00-00
-
Yamaha RD400 Foot Pegs, sold in pairs. High quality reproduction part, replaces Yamaha part no. 1A0-27413-00-00
-
Yamaha RD400 All Years Rear Foot Peg Rubbers (Pair) 120-27433-00. High quality reproduction part, replaces Yamaha part no. 120-27433-00
-
Reproduction seat cover for Yamaha RD400 C/D 1976-77. Excellent high quality materials, includes strap and Yamaha painted on rear of seat. Note this cover has the USA seat pattern, we also have the C/D 1976/77 cover with the European seat pattern also available here on the site.
-
Reproduction seat cover for Yamaha RD400 C/D 1976-77. Excellent high quality materials, includes strap and Yamaha painted on rear of seat. Note this cover has the European seat pattern, we also have the C/D 1976/77 cover with the USA seat pattern also available here on the site.
-
Yamaha RD400 Clutch Cable - All years, Excellent Quality Reproduction Cable.
-
JT Front Sprockets - RD400 (all years 76-79), choose size below. (Sprockets manufactured by JT). Choose sprocket size and quantity, then click add to cart.
-
Yamaha RD400 Lower Side Cover Grommett 90480-01401-00, replaces OEM part no. 90480-01401-00. Sold each.
-
Yamaha RD400 Oil Tank Grommet (90385-10026-00)
-
Yamaha RD400 Rear Fender Grab Rail Damper (between fender and grab rail on rear fender), sold each. Reproduction part, no longer available from Yamaha. Replaces Yamaha part no. 341-21638-00-00 and 1A2-21638-00-00. Also fits TX750 and TX750A.
-
JT Sprockets Rear Sprocket, Yamaha RD400F (1979). Available in 37 tooth only.
-
JT Sprockets Rear Sprocket, RD400 1976-1978, 38T (picture may vary from actual product)
-
Yamaha RD400 Seat Damper (all years), sold each. Replaces part no. 214-24724-00-00
-
Yamaha RD400 Tail Light Base 1A0-84712-60 Sheet, Base. This rubber part goes between the bracket and light. Reproduction part no longer available from Yamaha.
-
Yamaha RD400 Throttle Cable Adjuster Cover Replaces OEM #1A0-14169-00-00 (sold each). No longer available from Yamaha, this is a reproduction part.
-
Yamaha RD400 Throttle Cable Assembly (1976-1978) - Not a reproduction cable, Genuine Yamaha Part. Fits RD400 1976-1978 Note: Yamaha recently significantly reduced the price of this cable.
-
Yamaha RD400 Upper Side Cover Grommet replaces OEM part no. 90480-12053-00. Sold each. Note: 2 required per bike
