|
Yamaha RZ 350
|
Ignitions
|
Battery Eliminators
|
|
35V Electrolytic Capacitor
35V Electrolytic Capacitor. This capacitor can be used to create a battery eliminator which will work on most bikes with CDI ignitions. Instructions for making this capacitor into a battery eliminator can be easily found on the internet, please do not contact us for instructions, this is intended for the do it your selfer with the electrical knowledge and tools necessary to create and wire the eliminator. We also sell a pre-made capacitor battery eliminator here on the site by Zeeltronic. This does not work with bikes with points/condensor/magneto type ignitions. For instance, this eliminator will work with the RZ350 and will work with the RD350/400 with an MZB or Chinoy performance ignition installed but will not work with the stock RD350/400 ignition.
Price: $7.99
|
|
|
Battery Eliminator by Zeeltronic
Battery Eliminator by Zeeltronic. Battery eliminator is an electrolyte capacitor (30000-45000uF/25V) and works on most bikes with CDI ignitions. This does not work with bikes with points/condensor/magneto type ignitions. For instance, this eliminator will work with the RZ350 and will work with the RD350/400 with an MZB or Chinoy performance ignition installed but will not work with the stock RD350/400 ignition.
Price: $42.50
|
|
Yamaha RZ 350
|
Ignitions
|
Coils
|
|
Dynatek Ignition Coil - RZ350
Dynatek Ignition Coil - RZ350. Replacement ignition coil for RZ350/RD350LC. Dynatek miniature series .5ohm coil. Dual outputs. 40,000 volts vs. stock coil @25,000 volts. Includes plug caps. RZ coils are no longer available from Yamaha. This is a universal coil, not an exact duplicate of the RZ coil and not a direct bolt on; however, we offer an easy hardware/wiring installation kit that allows mounting of this coil in the stock location. Hardware/Wiring kit is offered here on the site in the RZ coils category. Otheriwise, you will need to determine a mounting method. Sold each - one coil w/dual outputs (2 dual coils pictured). Does not include plug wires, also sold here on the site under the coils category.
Price: $109.99
|
|
|
Dynatek Ignition Coil - RZ350 Hardware/Wiring Installation Kit
Dynatek Ignition Coil - RZ350 Hardware/Wiring Installation Kit. This kit allows mounting of our Dyna coil for the RZ350 in the stock location. Includes all hardware, nuts, bolts, spacers, sub wiring harness and complete installation instructions with pictures included with kit. Note: This is for installation on 1984-1985 USA models of the RZ350 and also fits the Australian RZ350 1983-1985. We have not installed this kit on other models of the RZ350 from other countries. Does not include plug wires, also sold here on the site under the coils category.
Price: $34.95
|
|
|
Dynatek Spark Plug Wires
Dynatek High Performance Spark Plug Wires. 8mm suppression spark plug wire set, great for use with our Dynatek coil. Highest grade graphite suppression core to reduce electrical noise and increase engine performance. Two wires, 48" length (cut to length for your specific application). Gray outer cover, includes insulators as pictured.
Price: $22.50
|
|
Yamaha RZ 350
|
Ignitions
|
Ignition/Timing Tools
|
|
Central Tools Dial Gauge - Timing Kit
Dial Gauge timing kit for inspection and adjustment of ignition timing. High quality, high precision instrument by Central Tools. 5.0mm range, .01mm increments, 0-100 sweep reading. This gauge will work with the engine in the frame on RD's, R5, RZ's, and most bikes. Includes indicator with easy read yellow face, adapter and 2 threaded extension (contact) rods (1-1/2" & 2"), foam padded box and instructions. This is our recommended timing gauge and the same one we use in the shop. Replacements parts available.
Price: $189.99
|
|
|
Ignition System Tester
Test the integrity and strength of your ignition system. Spark gap is adjustable from 0 to 10mm. Measure spark strength. Will test the ignition on most motorcycles, watercraft, ATVs & snowmobiles
Price: $9.99
|
|
|
Motion Pro 2-Stroke Timing Kit (includes adapter)
Timing kit for inspection and adjustment of ignition timing; gauge face size 1 1/2". Comes with adapter for air-cooled 2 strokes. Although this is an excellent gauge, we do not recommend it for the RD250/350/400/R5/DS7 as there isn't enough clearance to use the gauge with the engine installed in the frame. For the RD250/350/400/R5/DS7 or any bike with minimal clearance between the frame and spark plug, we recommend the Central Tools Dial Gauge which can be found here http://www.economycycle.com/servlet/the-629/Central-Tools-Dial-Gauge/Detail
Price: $155.00
|
Sign In
